Sponsored Links

 

 

 

200-522 INSTALLATION INSTRUCTIONS 85-91 Chevrolet Corvette 5.7L 85 ...

Source: www.airaid.com
Topic: Chevrolet


Short Desciption:
1 # 200-522 INSTALLATION INSTRUCTIONS 85-91 Chevrolet Corvette 5.7L 85-92 Chevrolet Camaro 5.7L Parts ... Please refer to your vehicles service manual for proper adjustment. 9. Reinstall the throttle body ...

 

Content Inside:
1 # 200-522 INSTALLATION INSTRUCTIONS 85-91 Chevrolet Corvette 5.7L 85-92 Chevrolet Camaro 5.7L Parts List (1) Power Plate (2) Gaskets (4) 8mm x 90mm Bolts (4) 8mm Washers (1) Linkage Plate (2) 6mm x 12mm Bolts (2) 6mm Lock Washers (2) 6mm Flat Washers Tools List 10mm Socket 13mm Socket Standard Screwdriver Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation.  Contact AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions            that are not clear to you.  Your PowerAid Throttle Body Spacer was carefully inspected and packaged.  Check that no parts are missing, or were damaged during shipping.  If any parts are missing, please contact AIRAID. Thank you for selecting AIRAID. 2 Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Remove throttle body intake assembly. 3. Remove (3) bolts from throttle linkage bracket and save. (Ref. "C") 4. Remove (4) bolts from the throttle body. (Ref. "D") 5. Install power plate with (2) gaskets. (Ref. "A") A. Place one gasket between the throttle body and the power plate. B. Place second gasket between the power plate and manifold. 6. Replace (4) bolts using Step 4 as an example. (Ref. "D") 7. Locate and install (1) linkage plate using saved bolts from linkage bracket and also (2) 6mm bolts and washers.     Refer to Step 3 8. Inspect & Test the throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjustment. 9. Reinstall the throttle body intake assembly using Step 2 as an example. 10. Reconnect battery cable. Enjoy!          &n ...

 

add to Google Reader add to Google Bookmark add to bloglines add to newsgator add to FURL add to digg add to webnews add to Netscape add to Yahoo MyWeb add to spurl.net add to diigo Bookmark newsvine Bookmark del.icio.us Bookmark @ SIMPIFY Bookmark MISTER WONG Bookmark Linkarena Bookmark icio.de Bookmark oneview Bookmark folkd.com Bookmark yigg.de Bookmark reddit Bookmark StumbleUpon Bookmark Slashdot Bookmark blinklist Bookmark technorati add to blogmarks add to blinkbits add to ma.gnolia add to smarking.com add to netvouz add to co.mments add to Connotea add to de.lirio.us

 

Related PDF Files

An Autobytel Case Study


Topic: Chevrolet

Theyve always been rock-solid.

Chevrolet Silverado & GMC Sierra First Responder Guide


Topic: Chevrolet

Chevrolet Silverado & GMC Sierra First Responder Guide Page 19of 34 Disabling Procedures Disabling Procedures Today,

200-522 INSTALLATION INSTRUCTIONS 85-91 Chevrolet Corvette 5.7L 85 ...


Topic: Chevrolet

1 # 200-522 INSTALLATION INSTRUCTIONS 85-91 Chevrolet Corvette 5.7L 85-92 Chevrolet Camaro 5.7L Parts ... Please refer to your vehicles service manual for proper adjustment. 9. Reinstall the throttle body ...

CHEVROLET HHR


Topic: Chevrolet

CHEVROLET HHR SELECTED STANDARD FEATURES • Head curtain side-impact ... outboard positions 1 • OnStar 1-Year Safe and Sound Plan Service 2 ... ECOTEC 2.2L DOHC 16 L4 SFI (149 hp @ 5600 rpm) • 5-speed manual ...

1982-96 Chevrolet S-10 2wd


Topic: Chevrolet

1983-01 Chevrolet S-10 2 Wheel Drive FTS7268-9 Front Brake Line ... brake system following the instructions in the GM shop manual. ... Service seal kits are available separately for future maintenance.

 

Sponsored Links